01225 704442
Quadro Gold LED Large Flush Ceiling Fitting ML7933
Quadro LED large flush ceiling fitting, gold finished.
This ceiling fitting has a large square-shaped outer frame with a white outer and gold inner, this holds an opal white polycarbonate diffuser in the centre.
It runs with 1 x 66-watt built-in LED with a colour temperature of 3000k (warm white) up to 6000k (daylight white) and has a total light output of 7050 lumens.
A remote control is supplied with the product and can be used to turn the lighting on/off, dim the lighting or change the colour temperature.
This is part of the Quadro Range.
| Electrical Class | Class 1 - Requires an Earth. |
| Finish | Gold (Colour) |
| Total Lumen Output | 7050 Lumens. |
| Light Source | Dimmable LED |
| Dimming Info | Controlled by a built in dimmer. N.B. Must not be used with a secondary dimmer switch. |
| Weight | 1.06kg |
| Height | 80mm (3.15") |
| Width | 500mm (19.69") |
| Depth | 500mm (19.69") |
You Might Also Like These
-flush-fitting-ml8128-2322.jpg)
-and-crystal-light-fitting-ml8884-1062.jpg)
-nine-light-crystal-semi-flush-ceiling-fitting-ml8891-1693.jpg)
Product Questions
Q1: Hi, Can you install two or more of these together and operate them as a slave / master system from one remote controller?
also, Is it controlled totally by the remote? Eg, On and off too? With just a feed to it for power as opposed to a switched live?
many thanks.
A1: In my experience, more than likely they are all on the same signal and 1 remote will control multiple lights, as long as they are in range of the remote.
With regards to using a wall switch, you could have the lights wired to one, but the light level etc can only be done with the remote, and switching it off at the wall would reset the brightness and colour temperature each time.
