Ikon Pro LED RGB Remote Control Decking Light Kit 59138
- Price Promise
Lowest Price Guaranteed - Free Delivery
On This Product Today - Availability
Normally Within 2 to 3 Days
Ikon Pro IP67-rated recessed remote-controlled decking light kit.
This class two double insulated kit includes a 1 x 15-watt driver with 5-meter extension cable, 2 x 5-way looms, 3 Pin Plug, 10 x 1.5 watt IP44 LED light fittings each 1.5 (1.2 and 1.3 meters of cable) and 1 x RF remote control.
The remote control operates the deck lights up to a distance of 10 meters (may be affected by solid objects and walls), with 4 buttons.
One turns the LEDs on and off.
One allows you to pass through the various colours in sequence; yellow, white, red, green, blue, purple and light blue.
Another press and the controller will go through all the colours, and yet another press of the button will move through the colours gradually.
The other two buttons allow you to dim the lights.
The light heads have a fresnel lens to enhance the lumen output.
Runs with a 10 x 1.5 watt RGB LED module.
Manufactured stainless steel (201) with polycarbonate lenses.
This is part of the Ikonpro Range.
Data Sheets:
new-ikon-2015-v3
59138-data-sheet
Electrical Class | Class 2 - Double Insulated. No Earth Required. |
Finish | Stainless Steel |
Light Source | Dimmable LED |
Dimming Info | Controlled by a built in dimmer. N.B. Must not be used with a secondary dimmer switch. |
IP Rating | IP67 |
Width | 45mm (1.77") |
Projection | 1mm (0.04") |
Cut Out | 32mm (1.26") |
Recessed Depth | 80mm (3.15") |
Product Questions
Q1: Hi.
do all the lights change to all the colours or is there 2 of each colour? Are the lights replaceable? Are they suitable for fitting into a brick wall? Also please .. The last 2 questions for product 59133 ikon pro blue led 25mm recessed deck lighting kit thanks
A1: This fitting should not be installed/mounted in concrete. And the parts are non-replaceable. Please refer to the data pdf sheet within the description for more information.
Q2: The image is confusing. Can the lights be all one colour (ie white, Red, Blue or whatever). Also, The info says the lights can be dimmed using two of the remote control buttons, Yet further down the page it says 'not suitable for dimming'.
A2: The light has two functions, one switches between the colours and one fades between them. After speaking with the manufacturer the light's change colour all at once, or two at a time but their is no function to set the lights to stay as just one colour. The light is a non dimmable light meaning it can't be used with a dimmer switch, however the brightness can be changed using the remote control.