01225 704442
Satin Brass IP44 Bathroom Switched Wall Light Astilbe-1WBC
IP44 rated, satin brass finished bathroom wall light.
This has a circular backplate with a single arm that protrudes and supports the shade/bulb holder, attached to this is the clear ribbed glass shade that shows the bulb and allows the full brightness to shine through.
The class two double insulated light can be operated by using the on/off pull cord located under the backplate.
Suitable for bathroom zone 1 if used in conjunction with a 30MA RCD.
Requires 1 x LED G9 bulb that is not included.
This is part of the Astilbe Range.
Data Sheets:
astilbe-1wbc
| Electrical Class | Class 2 - Double Insulated. No Earth Required. |
| Finish | Satin Brass |
| Light Source | G9 Mains Voltage Halogen. |
| Alternative Light Source | Retrofit LED Bulbs are also available. |
| Dimming Info | Suitable for dimming with a standard dimmer switch. (A high quality switch is recommended). |
| IP Rating | IP44 |
| Weight | 600g |
| Height | 125mm (4.92") |
| Width | 140mm (5.51") |
| Projection | 195mm (7.68") |
You Might Also Like These
Ask A Product Question
If you have a question about this product then please submit it below, we aim to respond within 20 minutes during office hours. Don't worry though, we'll only email in response to your question, we don't send spam or pass your details on to any third parties.
