Halton Solar Powered PIR Photocell Wall Light 96925
- Price Promise
Lowest Price Guaranteed - 1 In Stock
For Immediate Dispatch - Further Availability
Out Of Stock Permanently
Halton exterior PIR photocell wall light brushed stainless steel finish.
A modern solar-powered wall fitting with PIR and photocell, this light has a round wall plate with a small protruding arm and a tubular-shaped body with a tiered-shaped light head and a white polycarbonate diffuser.
This runs with a 3000k warm white 5.8w integrated LED and produces 310 lumens.
Also, complete with an on/off push switch which activates non-motion and motion.
This has a 110 ° detection angle and an 8m maximum range.
Complete with integrated control gear.
Enjoy great flexibility with the control of light levels by selecting one of the modes.
Press and hold the switch for 3 seconds to turn on, the product will stay on at 30Lm.
After mode 1, press the switch to change to mode 2.
Product will stay on at 30Lm and increase to 130Lm when motion is detected (This will stay at 130Lm for 25 seconds then dim to 30Lm and stay lit).
After mode 2, press the switch to change to mode 3.
Product will be 310Lm when motion is detected and will turn off after 25 seconds.
Press and hold the switch for 3 seconds to turn it off.
This is part of the Halton Outdoor Range.
Electrical Class | Class 3 - SELV (Separated or Safety Extra-Low Voltage) power source. |
Finish | Stainless Steel |
Light Source | LED. |
Dimming Info | Not Suitable For Dimming. |
IP Rating | IP44 |
Weight | 500g |
Height | 198mm (7.8") |
Width | 147mm (5.79") |
Projection | 165mm (6.5") |