Amalfi Ceramic Paintable Wall Washer 1079001
- Price Promise
Lowest Price Guaranteed - 3 In Stock
For Immediate Dispatch - Further Availability
Normally Within 2 to 3 Days
Amalfi ceramic wall washer in a white finish.
This wall washer has a three-stage pattern design, which when lit up looks very effective as light is thrown upwards and downwards, this product can be painted to look discrete within your décor.
LED lamps can also be used to save on energy costs.
Class 2 double insulated so no earth is required.
Requires 1 x LED E27 (Edison screw) bulb, which is not included with the product.
Data Sheets:
ast23-data-sheet
ast23-instruction-sheet
painting-guide
Electrical Class | Class 2 - Double Insulated. No Earth Required. |
Finish | Unglazed (Paintable) |
Light Source | ES-E27 Incandescent or LED. |
Alternative Light Source | Retrofit LED Bulbs are also available. |
Dimming Info | Dimmable. A high quality dimmer switch is recommended. |
IP Rating | IP20 |
Weight | 1.1kg |
Height | 130mm (5.12") |
Width | 315mm (12.4") |
Projection | 80mm (3.15") |
Product Questions
Q1: What type of paint do i need to buy.
A1: It's our understanding that most of our customers use the same paint they use to paint their walls. Therefore emulsion tends to be the most commonly used paint on unglazed wall washers
Q2: Can u see the bulb
A2: Only if you are looking up from directly underneath the product
Q3: What is the distance between the 2 mounting screw holes in the back of the unit please.
A3: The distance between the two mounting screws is about 6 inches and the screw holes start about 3 inches in from each end
Q4: It doesn't look like there is much distance internally to get a screw driver in to attach to wall. Do you happen to know the working distance?
thanks
A4: You would measure the distance between holes on the fitting then put the screws in the wall and the light has a groove on so it sits over the screw head and sits in position, so no need to screw up once fitted.